March 3, 2018 The Water Engine. New Design to overcome the Prior Patent's Patent Examiner's Objections.
Book cover image

The Water Engine ...

Gregory GOrDon


Buy Now button

Video Coming Soon!

To Build aVortex Force Reactor simply purchase one each of the above four items and follow these instructions.

You place the return pump in the bottom chamber and run a long piece of tubing through the hole in the bottom tank up into the top Vortex Chamber.  

Seal the hole with Silicone Glue. 


Let the tube drop down into the Vortex Chamber and wrap around the bottom of the Vortex Chamber three times. 

You will need to place a hole in the white strip between the two chambers through which to insert the return pump electric plug cord.


To start the reaction you fill the bottom tank one third of the way up. 

Then you plug the hole in the top Vortex Chamber and fill with water. 

Pull the plug and immediately start the return pump. 

A Vortex will form and you will have a beautiful creature to gaze upon.

The Water Engine. The World's First Mass Market Perpetual Motion Machine.  It produces electricity and can earn cash for its owners.  

For the answer to the Mensa Test please see latest Go Fund Me Update.

The Water Engine: Pull to Start Vortex.Energy Flywheel Generator
In order to keep the progress I have made in getting to this point it is time to build the working reactor that I've promised.  In order to do this I've set up a Go Fund Me Campaign to raise the necessary funds.  Please help by clicking on the link below and contribute what you can.  I may actually have to show the patent examiner a working model to get the patent.  All funds will go toward building and demonstrating The Water Engine. 

As of March 13, 2018 I have raised $20.00 of my goal.  So I have decided that either people think I am nuts, stupid,or not God.  in response to this decision I am going to give you the answer to the Mensa Question.  You will see the problem in the Go Fund Me description.  For the solution to the problem please read the whole description then see the latest update for the solution.

After all of that, if you think that  this knowledge is useful you, please make a donation so that I may build the reactor and hopefully help make us both some money and save all of the 1.6 billion people now living on Earth with no electricity at all.

Ciick Here to view or donate to Go Fund Me Campaign


The Water vortex has fascinated scholars world wide for centuries because of its beauty and power.  

People have been known to stare at a vortex in a clear circular tank for hours while watching it swirl and

undulate as it flows down through its uniquely shaped path.  The huge vortex in the Ripley’s Believe It Or Not

 Museum on 42nd Street in New York City carries a plaque that tells of the power of the vortex.  According

to the plaque there was once a natural vortex that swallowed a whole island.  Combing the beauty and pow

er of a water vortex is the purpose of the P.E.T. — Perpetual Electricity Turbine Vortex Force Reactor, now

known as the Electric Pet.  It not only looks beautiful it also produces electricity.


Designed to compete with home solar and wind power systems the electric pet is to be sold along with fish

and fish tanks in pet stores nationwide. Under the Net Metering laws that exist in many states consumers who

produce “green” power are able to sell that power back to the Electric company at the  same price for

which they pay for electricity up to the amount of their monthly bill. That means that a properly sized electric

pet will pay for a consumers electric bill.  And there exist many state and federal programs that will help pay

for the equipment. 


The advantages of the P.E.T. over  wind and solar are numerous including lower cost, ease of installation,

portability and the ability to produce power around the clock regardless of weather conditions.  Add to that

the beauty of the vortex and you can see why the Perpetual Electricity Turbine is man’s next best friend.

The Vortex Force is the same force that is responsible for the creation of Hurricanes and Tornadoes.  It's proper name is the Coriolis Force.  Many people are currently trying different ways to capture this power to make electricity.  The Vortex Force is also a group of men and women who are working to see to it that this promising technology is spread around the world.  

All of that sounds nice but means absolutely nothing until we have a working model to show for our efforts. 

That is the purpose of this web site to record the process that we go about as we try to build a working model of a PET Vortex Force Reactor.  To record the progress of our efforts I will be blogging below as well as posting new videos of the steps we take to bring the world's first PET Vortex Force Reactor into the world.

A lot has happened since starting this site.  

We have built a reactor and sustained a vortex for months at a time using the Zen water purifier body.  

We have registered a patent for the Perpetual Electricity Turbine that will convert the power of the Vortex into electricity.

According to Buckminster Fuller it is better to use products that are already made than to start building the same thing over again.  In light of Bucky's thoughts I have decided that it would be better to design the Perpetual Electricity turbine to fit within the Zen Water Systems Vortex Force Reactor Body that we already have.  It will require a bit of challenge but it also narrows down some of the design elements. 

I am aiming to get four kilowatts from the machine using four one kilowatt high speed generators.  This means building an insert to go between the two chambers of the Zen Reactor Body.  You can see a mock-up of what that will look like at the top left of the page.  The next thing to do is to build an insert for testing purposes.

Finally figured out how to make the Vortex Force Reactor work.

I have finally figured out how to make The Vortex Force Reactor work.  After studying the Micro-Hydro-Generators that are out there it became apparent to me that there was a fatal flaw in the design that I had originally contemplated.  You see when you start the vortex it streams down from the top and does not arise from the bottom.  But, in all of the attachments to the Micro-Hydro-Generators that I've seen the attachment from the generator to the wheel has a big circular attachment in the middle.  As I see it this will stop the vortex from forming.

The solution is to put the generator in the bottom tank and send the shaft up from the bottom.  Remember that in one of the videos I explained that what you see when looking down through the vortex is a hole that goes straight through to the bottom.  Thus what needs to happen is for the generator to rest at the bottom of the bottom tank with a tiny shaft that goes up through the middle of this hole.  And, we don't need a Pelton Wheel.  What we need is a special turbine that will disrupt the vortex as little as possible.  I have designed a turbine that is very simple but should do the trick.

What it is is a small shaft with one crossbar at the top.  The crossbar is very short.  Actually the shorter the better.  Using a generator like the one you see on this page there will be a long shaft long enough to get from the top of the generator shaft as it stands now while the generator is resting on the bottom of the bottom tank and go up through the hole between the two tanks.  The single crossbar would look like the oar to a Kayak only the two paddles would be flat and in line with the shaft.  The whole thing should be about two inches in length to maximize speed by being close to the Vortex.

This new concept gives new life to the whole project and even though the original plans were published several years ago I have spoken to a lawyer who assures me that this new concept will extend my year deadline for a published patent to the date of this post or at least until the day that I first received the Reactor Body.  I asked if I should still publish the information and he said that as long as I abide by this new deadline the patent can be obtained.

I have been made aware of a company that makes special parts for Micro-Hydro-Generators and am going to contact them in the morning to price the construction of such a turbine.  As the parts won't take much material I hope that the cost won't be excessive.  Yet I may have to wait a while before testing the concept.  Funds are low and there may be some issues with my lab space.

As soon as I am able to have one built I will make arrangements for other custom made turbines so that you can get your own to build test Reactors for yourself.  As I see it there is nothing stopping us from getting from three to four kilowatts from This particular Vortex Force Reactor Body using my new turbine design and one of the generators that you will find linked to the generator picture on this page.

Add a Comment

(Enter the numbers shown in the above image)