Video Coming Soon!


To Build aVortex Force Reactor simply purchase one each of the above four items and follow these instructions.



You place the return pump in the bottom chamber and run a long piece of tubing through the hole in the bottom tank up into the top Vortex Chamber.  



Seal the hole with Silicone Glue. 


 

Let the tube drop down into the Vortex Chamber and wrap around the bottom of the Vortex Chamber three times. 



You will need to place a hole in the white strip between the two chambers through which to insert the return pump electric plug cord.


 

To start the reaction you fill the bottom tank one third of the way up. 



Then you plug the hole in the top Vortex Chamber and fill with water. 



Pull the plug and immediately start the return pump. 



A Vortex will form and you will have a beautiful creature to gaze upon.

The World's First Perpetual Electricity Turbine Vortex Force Reactor.  

The Electric Pet.  Man's Next Best Friend.



The Water vortex has fascinated scholars world wide for centuries because of its beauty and power.  

People have been known to stare at a vortex in a clear circular tank for hours while watching it swirl and

undulate as it flows down through its uniquely shaped path.  The huge vortex in the Ripley’s Believe It Or Not

 Museum on 42nd Street in New York City carries a plaque that tells of the power of the vortex.  According

to the plaque there was once a natural vortex that swallowed a whole island.  Combing the beauty and pow

er of a water vortex is the purpose of the P.E.T. — Perpetual Electricity Turbine Vortex Force Reactor, now

known as the Electric Pet.  It not only looks beautiful it also produces electricity.

 

Designed to compete with home solar and wind power systems the electric pet is to be sold along with fish

and fish tanks in pet stores nationwide. Under the Net Metering laws that exist in many states consumers who

produce “green” power are able to sell that power back to the Electric company at the  same price for

which they pay for electricity up to the amount of their monthly bill. That means that a properly sized electric

pet will pay for a consumers electric bill.  And there exist many state and federal programs that will help pay

for the equipment. 

 

The advantages of the P.E.T. over  wind and solar are numerous including lower cost, ease of installation,

portability and the ability to produce power around the clock regardless of weather conditions.  Add to that

the beauty of the vortex and you can see why the Perpetual Electricity Turbine is man’s next best friend.


The Vortex Force is the same force that is responsible for the creation of Hurricanes and Tornadoes.  It's proper name is the Coriolis Force.  Many people are currently trying different ways to capture this power to make electricity.  The Vortex Force is also a group of men and women who are working to see to it that this promising technology is spread around the world.  


All of that sounds nice but means absolutely nothing until we have a working model to show for our efforts. 

That is the purpose of this web site to record the process that we go about as we try to build a working model of a PET Vortex Force Reactor.  To record the progress of our efforts I will be blogging below as well as posting new videos of the steps we take to bring the world's first PET Vortex Force Reactor into the world.

A lot has happened since starting this site.  

We have built a reactor and sustained a vortex for months at a time using the Zen water purifier body.  

We have registered a patent for the Perpetual Electricity Turbine that will convert the power of the Vortex into electricity.

According to Buckminster Fuller it is better to use products that are already made than to start building the same thing over again.  In light of Bucky's thoughts I have decided that it would be better to design the Perpetual Electricity turbine to fit within the Zen Water Systems Vortex Force Reactor Body that we already have.  It will require a bit of challenge but it also narrows down some of the design elements. 

I am aiming to get four kilowatts from the machine using four one kilowatt high speed generators.  This means building an insert to go between the two chambers of the Zen Reactor Body.  You can see a mock-up of what that will look like at the top left of the page.  The next thing to do is to build an insert for testing purposes.




The New Way of Tapping the Water Vortex for Power

I finally got a picture of how we are now tapping the Vortex to generate electricity.  In the video you will see a generator mounted on top of the Vortex Force Reactor Body.  That was not efficient.  Now we are going to tap it from the bottom using The Perpetual Electricity Turbine.  Below is a picture of how the turbine works.


Vortex Water Flow

10 water in vortex chamber
12 Vortex
14 Direction of water spinning in the Vortex
16 Water exploding out into patented jet nozzle
18 Stream of water shooting into flywheel turbine
20 Direction of turbine spin which connects to high speed generators


As you can see this method of getting electricity out of the vortex is totally different than that shown in the video.  Now the plan is to build an insert that fits between the Vortex chamber and the bottom tank using the same Zen water purifier body that we used in the video.  High speed generators that are about the length of a cigarette are available from China at very low cost.  These produce about 500 watts of electricity.  Using four of them on the turbine will net us two kilowatts of electricity from one Reactor.


Add a Comment

(Enter the numbers shown in the above image)